The MT88E46 is a CMOS integrated circuit suitable for receiving the FSK and CAS signals in North American (Bellcore) CIDCW, CWD and CID (Calling Identity Delivery) services. It provides an optimal solution for the CIDCW (also known as Type 2) and CWD (Type 2.5) telephone set applications by providing separate input op-amps for Tip/Ring and 4- wire side (receive pair of the telephone hybrid or speech IC) connections. The Tip/Ring connection is compatible with TIA's MEI scheme and can be used for FSK demodulation and 'on hook mode' CAS detection. The 4-wire side connection is for 'off hook mode' CAS detection. The CAS detection modes - on hook and off hook - use different algorithms which are optimized for the CPE states. In 'off hook mode' the CAS detector is Bellcore compliant when near end speech is attenuated 8dB or better. 'On hook mode' is optimized for talkdown only and typically meets talkdown condition 1 (the average case) without speech attenuation at Tip/Ring such as in the on hook state MEI CPE.

Features & Benefits

• Compatible with Bellcore GR-30-CORE, SR-TSV-002476; TIA/EIA-716 and TIA/EIA-777
• Pin compatible with MT88E45
• Differential input amplifiers with adjustable gains for Tip/Ring and 4-wire side connections
• TIA (Telecommunications Industry Association) MEI (Multiple Extension Interworking) compatible architecture: CAS (CPE Alerting Signal) detection is selectable between Tip/Ring and 4-wire side
• 4-wire side CAS detection is Bellcore talkoff and talkdown compliant when near end speech is attenuated 8 dB or better, and is close to talkoff compliant even without near end speech attenuation
• Tip/Ring side CAS detection typically meets talkdown condition 1 (the average case)
• 1200 baud Bell 202 and CCITT V.23 FSK demodulation
• Selectable 3-wire FSK data interface (serial bit stream or 1 byte buffer) with facility to monitor stop bit for framing error check
• FSK carrier detect status output
• 3 to 5 V +/- 10% supply voltage
• Uses 3.579545 MHz crystal
• Low power CMOS with power down mode

Documentation

• mt88E46-datasheet-nov2006.pdf

Design Manuals

Software Manuals

Application Notes

• MSAN-179 - MT88E46 and MT88E45 CAS Detector Design Guide.pdf

Product Previews

• asp-productpreview-mar2010.pdf

Typical Applications

• Bellcore compliant CIDCW (Calling Identity Delivery on Call Waiting) and CWD (Call Waiting Deluxe) telephones
• CIDCW and CWD telephone adjunct boxes
• Computer Telephony Integrated (CTI)

Product Packaging & Availability

Part Number	Package Type	Pin Count	Lead-Free Option	Shipping Option(s)	Lead Time(wks)	Status
MT88E46AS1	SMALL OUTLINE IC OR	20	Pb-free-Matte Tin	Tubes. Bake & Drypack	8 Week(s)	Production
MT88E46AS1	SMALL OUTLINE IC OR	20	Pb-free-Matte Tin	Tubes. Bake & Drypack	8 Week(s)	Production
MT88E46ASR1	SMALL OUTLINE IC OR	20	Pb-free-Matte Tin	Tape & Reel. Bake & Drypack	8 Week(s)	Production
MT88E46ASR1	SMALL OUTLINE IC OR	20	Pb-free-Matte Tin	Tape & Reel. Bake & Drypack	8 Week(s)	Production

Packaging Information

• Soldering Profiles
• Moisture Sensitivity
• Shelf Life
• Reliability Data

Technical Support

Registered users click here to access the service.

Not registered? Register online today and get access to all our technical support services.

Forgot your password?

Visit the page to find distributor, representative and Zarlink sales office contact information.